Maintenance Intervals; Adjusting The Carburettor; Adjusting The Bowden Cable - Grizzly BRM 46-144 A-OHV Traduction De La Notice D'utilisation Originale

GB
• Take off the spark plug connector
( 11) and check the blade for wear
and damage.
• Always have a blunt blade resharp-
ened by a specialist company, as an
imbalance check can be carried out
there.
• Always have a specialist workshop
change a damaged or imbalanced
blade.

Maintenance Intervals

Regularly carry out the maintenance work listed in the "maintenance intervals" table.
Regular maintenance prolongs the life of the equipment. It also gives optimum cutting
performance and avoids accidents.
Maintenance Work
(See "cleaning and mainte-
nance")
Check and tighten screws, nuts
and bolts
Check the engine oil level/petrol
level and refill with engine oil/
petrol if required
Clean operating elements / the
area around the silencer
Change the engine oil
Replace the air filter
a
Clean/adjust the spark plug
Replace the spark plug
Clean the air cooling system
Replace more often if there is a high level of dust or heavy dirt
a
Adjusting the Bowden
cable
If the Bowden cables go out of adjust-
ment, you can adjust them.
106
All manuals and user guides at all-guides.com
Before
Work


a
Incorrect installation can result
in serious injury.

Adjusting the Carburettor

The carburettor has been preset in the
factory for optimum performance. If read-
justments are required, have the adjust-
ments made by a specialist workshop.
After
After 1 After
st
5 Hrs. 8 Hrs.


1. Loosen the small locking nut (36).
2. - Turn the adjusting nut (37) counter-
clockwise:
The Bowden cable shortens.
- Turn the adjusting nut (37) clock-
wise:
The Bowden cable extends.
After
Annual
50 Hrs.


 



