Assembling And Adjustments; Check The Oil Level; Check The Air Pressure In The Tyres; Connect The Hydraulic Hoses - Husqvarna PP 325 E Manuel D'utilisation

ASSEMBLING AND ADJUSTMENTS

Check the oil level

The power pack is supplied with 12 litres of hydraulic oil
466 cSt HSH of a well-known brand. The oil is an
environmentally adapted and SP approved ester oil that
will drastically reduce the risk of allergic reaction or skin
irritation upon contact. In addition, the oil is quickly
degradable in case of unintentional release.
• Check the hydraulic oil level in the power pack. This is
checked with the level indicator.
Min. level = red line
Max. level = black line
Do not exceed the max. level when filling the tank with
hydraulic oil. The hydraulic oil expands when it gets hot
and can overflow if the level is too high. Tank volume 12 l
(3.2 US gallons).

Check the air pressure in the tyres

• Check the air pressure in the tyres. This should be 2
bar.
50 – English
All manuals and user guides at all-guides.com

Connect the hydraulic hoses.

•
•
Hydraulic hose, return IN (B)
Hydraulic hose, pressure OUT (A)

Connect water cooling

•
•
The couplings should be wiped clean to reduce the
risk of leakage before the hoses are fitted.
The couplings are locked by turning the outer sleeve
on the female coupling so that the slot moves away
from the ball.
Connect a water hose between the upper cooling
connection on the hydraulic oil tank and the working
tool, and also a hose from the closest hydrant via a tap
to the lower cooling connection on the tank.
If no tool requiring water is used, just let the cooling
water flow to the closest floor drain.