Important Safety Instructions And Document Symbols; Supplemental Directives - Dometic R31 Série Manuel D'installation

1

IMPORTANT SAFETY INSTRUCTIONS AND DOCUMENT SYMBOLS

This manual has safety information and instructions to help you eliminate or reduce the risk of accidents
and injuries.
1.1 Recognize Safety Information

This is the safety alert symbol. It is used to alert you to potential physical injury hazards. Obey all
safety messages that follow this symbol to avoid possible injury or death.
1.2 Understand Signal Words
A signal word will identify safety messages and property damage messages, and will indicate the degree or level
of hazard seriousness.
 indicates a hazardous situation that, if not avoided, could result in death or serious injury.
indicates a hazardous situation that, if not avoided, could result in minor or moderate
injury.
is used to address practices not related to physical injury.
I
Indicates additional information that is not related to physical injury.

1.3 Supplemental Directives


Read and follow all safety information and instructions to avoid possible injury or death.
Read and understand these instructions before installation, use, or maintenance of this product.
Incorrect installation, operation, or maintenance of this product can lead to serious injury or death.
The installation must comply with all applicable local or national codes, including the latest edition of the
following standards:
U.S.A.
• ANSI/NFPA70, National Electrical Code (NEC)
• ANSI/NFPA 1192, Recreational Vehicles Code
• ANSI Z21.57, Recreational Vehicles Code
• ANSI/NFPA 70, National Electrical Code
Models with an oven light will utilize an external electrical source. When installed, these models must be
electrically grounded in accordance with state or other codes. In the absence of such codes, refer to the National
Electrical Code, ANSI/NFPA 70.
3
CANADA
• CSA C22.1, Parts l & ll, Canadian Electrical Code
• CSA Z240 RV Series, Recreational Vehicles
RANGE AND SLIDE-IN
EN