Dometic R31 Série Manuel D'installation page 16

RANGE AND SLIDE-IN
7.1 Checking The Burner Flames And Oven Pilot
STEP 1
Burner
• Light the burners, one at a time. Refer to
"Lighting The Burners" on page 12, for more
information.
• Confirm that the burner flame is present and
adjusts when the control knob is turned.
7.2 Cleaning The Range Or Slide-In
STEP 1
Range Top
Cleaning the range top or slide-in:
• Remove the grate.
• Clean with warm, soapy water.
• Rinse with clean water.
• Dry with soft cloth.
I
Heavy burned on soil may require repeated
cleaning steps until the soil is completely
removed.
EN
STEP 2
• Light the oven pilot. Refer to "Setting The Oven
Pilot" on page 13, for more information.
• Confirm the pilot flame is present.
Additional Cleaning Methods
Grate
Control knobs
Soft Cloth
Control Panel
Range Top
Surface
Surface Burner
Grates
Surface Burners,
Burner Ports, or
Orifices
Oven
(Oven Interior)
Item Cleaning Method
Pull the knobs straight off of the
stems to clean. Use a mild liquid
cleaner or glass cleaner.
Use a spray glass cleaner,
applying the cleaner to a paper
towel. Do not spray glass cleaner
directly on the panel. Do not
use oven cleaner on the control
panel.
Use a mild liquid cleaner or glass
cleaner.
Clean area as soon as it becomes
dirty. Use a non‑abrasive, plastic,
scrubbing pad, as necessary.
If clogged, gently brush
perforated areas with a
lightweight brush (toothbrush)
or carefully clean the holes out
using a toothpick.
Use warm, soapy water. For
heavy soil, use an oven‑cleaning
spray and follow the
manufacturer directions on the
label. Use a non‑abrasive, plastic,
scrubbing pad, as necessary.
Pilot
16