Manual Setting; Error Screen - Panasonic VIERA TC-P58VT25 Guide Rapide

First Time Setup
Press to return to
the previous screen
16
All manuals and user guides at all-guides.com
Configure Network settings
Select the Network type
Network settings Step 5 of 6
Ethernet cable Wireless (WiFi) Set later
LAN
Selects Ethernet cable or wireless network. If
OK
you select "set later" and want to repeat the
Select
Network settings, select "Network settings" in
RETURN
the Setup Menu.
Select the setting mode
Network settings Step 5 of 6
Automatic Manual
OK Checks for proper network connection,
settings and communication to the Internet
Select
and server automatically.
RETURN
Automatic
Start connection test
Network settings
Step 5 of 6
Connection test
Check Ethernet cable connection
Validate IP address
Check for IP address duplication
Check connection to the Internet
Check communication with Viera CAST server.
Test in progress...
RETURN
Complete "Network settings"
Helpful information is displayed when you
successfully complete "Network settings".
Network settings
Network settings are complete.
You can use VIERA CAST.
VIERA CAST lets you enjoy Internet
contents on your VIERA TV.
OK Press OK to exit.
RETURN
About wireless LAN
Wireless LAN adapter and Access point need to be obtained separately.
For the latest information on applicable LAN adapters, check the following website:
http://panasonic.jp/support/global/cs/tv/
Check that the Access point supports WPS*.
(If it does not support WPS, the encryption key of the Access point is required when configuring settings.)
Follow the instructions on the Access point setup screen and configure the appropriate security settings.
For more details on setting of Access point, please refer to operating manual for the Access point.
We recommend using 11n (5 GHz) for the wireless system between the wireless
LAN adapter and Access point.
Communication is also possible with 11a, 11b, and 11g (2.4 GHz), but the
communication speed may be slower.
If the wireless system of the Access point is changed, devices that could connect by
wireless LAN may no longer be able to connect.
When VIERA CAST, Network camera, or other device is using the network, do not
disconnect the wireless LAN adapter.
Keep the TV away from the following devices as much as possible:
Wireless LAN, Microwaves, and other devices that use 2.4 GHz and 5 GHz signals.
Otherwise, the TV failures such as malfunction may occur due to the radio wave interference.
* WPS: Wi-Fi Protected Setup
(Continued)
Set later: Go to 6
You can set in "Setup" menu later.
Wireless (WiFi): Start "Wireless network" (p. 17)
Automatic: Press OK to start setup automatically.
Error screen is displayed when
Network connection has failed.
Manual: Go to Manual setting.
Manual

Manual setting

Network settings
Connection test
IP setting mode
IP address
Subnet mask
Default gateway
DNS setting mode
Primary DNS
Secondary DNS
Proxy address
Proxy port
Connect test
Connection
Mac address
Select
error
Change
RETURN

Error screen

Network settings
Connection test
Check Ethernet cable connection
Validate IP address
Check for IP address duplication
Check connection to the Internet
Check communication with Viera CAST server.
Connection to local network (router) failed.
Ensure wireless network availability
OK
Select
RETURN
Retry: Go to "Start connection test"
Set later: Go to
Step 5 of 6
Automatic
192.168.0.4
255.255.255.0
192.168.0.1
Automatic
192.168.0.1
221.184.25.249
00-00-aa-cc-33-ab
Manual
Step 5 of 6
Retry Manual Set later
Try again?
Checks for proper network connection,
settings and communication to the Internet
and server.