Dometic PLB40 Notice D'utilisation page 11

All manuals and user guides at all-guides.com
PLB40
Switching off the lithium iron phosphate battery pack
The battery pack switches off automatically after 24 hours if no load and no charger
are connected.
➤ Press the power button (fig. 2 1, page 2) for at least 3 seconds to switch the
device off.
✓ The device emits 1 beep.
✓ The display switches off.
6.3 Charging the lithium iron phosphate battery pack
!
WARNING! FIRE AND/OR EXPLOSION HAZARD.
Lithium iron phosphate batteries that are charged with too high voltage
can ignite. Use 8 to 25 V input voltage to charge the battery pack.
➤ Adjust the handle upwards.
➤ Place the lithium iron phosphate battery on a firm base.
Charging with the power supply unit
➤ Connect the power supply unit to the connection socket (fig. 2 8, page 2).
➤ Connect the power supply unit to the AC mains.
✓ The
symbol lights up.
✓ The display shows the charging status.
Charging with the smart alternator, 12 V accessory socket or solar panel
➤ Connect the charge cable to the connection socket (fig. 2 9, page 2).
➤ Connect the DC plug to the DC inlet Anderson socket on battery side.
✓ The
symbol lights up the battery state of charge as a percentage.
✓ The display shows the charging status.
EN
Using the appliance
11