Installing The Batteries In The Remote Control - Samsung HW-H600 Manuel D'utilisation

REMOTE CONTROL
You can turn the volume down to 0 with the push of a button. Press
again to restore the sound to the previous volume level.
Select the STANDARD mode if you want to enjoy the original sound.
When you choose a Sound Effect mode (except STANDARD), Surround
Sound Expansion will automatically be turned OFF.
If there is more than one file on the device you are playing, and you
press the # button, the previous file is selected.
Press the Bluetooth POWER button on the remote to turn the
If the SoundStand is connected to a digital TV and the video appears
out of synch with the audio, press the Audio Sync buttons to synch the
Press the AUDIO SYNC +/- buttons to set the audio delay from 0 to
300 ms. In USB mode, TV mode, or BT mode, the Audio Sync

+ Installing the Batteries in the Remote Control

1. Use a suitable coin to turn
the remote control's battery
cover counterclockwise to
remove it as shown in the
figure above.
Turns the SoundStand on and off.
VOLUME
Adjusts the volume level of the unit.
SOUND EFFECT
Press to select a sound effect mode.
Skip Back
Bluetooth POWER
Bluetooth Power function on and off.
See pages 16 and 18 for details.
AUDIO SYNC
audio with the video.
function may not work.
2. Insert a 3V lithium battery. Keep the
positive (+) pole facing up when inserting
the battery. Put the battery cover on and
align the ' ' marks side by side as
shown in the figure above.
10
POWER
POWER
MUTE
VOL
SOUND
EFFECT
Bluetooth
POWER
3. Use a suitable coin to turn
the remote control battery
cover clockwise as far as it
will go to fix it in place.
SOURCE
MUTE
WOOFER
LEVEL
Surr.
Sound
DIMMER
SYNC
SYNC
REPEAT