Anti-Tip Wheels; Lap Belt; Crutch Holder (Optional); Operating The Foldable Power Wheelchair - B+B Via Mode D'emploi

Via
| Foldable power wheelchair

3.5.3. Anti-tip wheels

The two anti-tip wheels are located in the bag underneath the seat.
Plug the anti-tip wheels into the frame openings on the rear of the Via.
Push the pin on the clamp through the hole in the frame.
Check that the anti-tip wheels are firmly in place before you set off.
5a
To remove the anti-tip wheels, repeat the procedure in reverse order.
5b

3.5.4. Lap belt

The lap belt is fixed under the seat sling.
6
• Adjust the belt length to suit your requirements, by positioning the
buckle accordingly.
• Lock the belt with the buckle.
• Unlock the belt by pressing the clasps together.

3.5.5. Crutch holder (optional)

The crutch holder (Fig. 7.1) is available as an accessory for the Via.
You can keep your walking stick or crutches in the crutch holder on the
7.1
frame during your trip. There is a loop on the backrest (Fig. 7.2) which
will also hold the top end of your walking stick or crutch in position.
7.2
46
We recommend that you use anti-tip wheels in pairs.
Foldable power wheelchair |
4. Operating the foldable power
wheelchair
Before driving for the first time, familiarise yourself with the functions
of the control unit.

4.1. Operating the control unit

The control unit is mounted to the armrest of your foldable power
wheelchair. It contains LED displays, lamps and functional elements.
(see Fig. 8)
C
A
D
B
E
Bischoff & Bischoff GmbH |2021-02-18 - Revision: 1
Via
Power button
A
Speed setting
B
Battery status display
C
Horn
D
Joystick
E
8
47