Connect The Headset; Make Calls - Nokia 2855i Mode D'emploi

S e t u p y o u r p h o n e

■ Connect the headset

A compatible headset such as the Nokia
HS-5 may be purchased with your
phone or separately as an enhancement.
See "Enhancement settings," p. 56
for information.
1. Plug the headset connector into
the Pop-Port™ connector at the
bottom of your phone.
appears on the display.
2. Position the headset on your ear.
With the headset connected, you can
make, answer, and end calls as usual.
• Use the keypad to enter numbers.
• Press the call key to place a call.
• Press the end key to end a call.
You can also plug a compatible headset, such as the such as the Nokia HS-9
Universal Headset, into the 2.5-mm headset jack on the side of your phone to
allow hands-free operation. See "Enhancement settings," p. 56.
Warning: When you use the headset, your ability to hear outside sounds
may be affected. Do not use the headset where it can endanger your safety.

■ Make calls

Using the keypad
1. Enter the phone number (including the area code), and press the call key.
To delete a character to the left of the cursor, select Clear.
2. To end the call, press the end key. To cancel the call attempt, select End call.
Use the save contact option
1. In the standby mode, enter the phone number (including the area code) and
select Save, enter a name for the contact, and select OK.
2. To make the call, press the call key. To return to the standby mode, select Done.
Use the contacts list
1. In the standby mode, scroll down to display your contacts.
2. Scroll to the contact you wish to dial, and press the call key. To view details of
the entry, select Details.
16