Electrohome 20EV701 Manuel D'instructions page 47

All manuals and user guides at all-guides.com
Connections to other equipment
Using the audio/video inputs
If you connect the TV/DVD to VCR, camcorder or TV game you can select by pressing INPUT SELECT.
Press INPUT SELECT repeatedly to select the desired mode.
"LINE1", "LINE2" or TV channel will display on the screen.
➔ LINE1 ➔ LINE2 ➔ TV
1. To connect the TV/DVD to a VCR
If you connect a VCR with an S-VIDEO cable to the S-VIDEO IN jack on the rear lower right of the TV/DVD, you
must also connect the audio cables to the AUDIO IN jacks on the rear lower right of the TV/DVD (LINE1 IN).
The S-VIDEO cable only carries the video signal. The audio signal is separate.
NOTE:
When the S-video cable and the standard video cable are connected at the same time, the S-video cable takes
precedence.
VCR
To S-Video OUT
2. To connect the TV/DVD to a camcorder, or a TV Game
To playback from the camcorder, connect the camcorder to the TV/DVD as shown.
The TV/DVD can also be used as a display device for many video games. However, due to the wide variety of
different types of signal generated by these devices and subsequent hook-up variations required, they have not
all been included in the suggested connection diagrams. You'll need to consult each component's Owner's
Manual for additional information.
Camcorder
5N10721A_EN_P47-53
NOTE:
In the DVD mode this key will not
operate.
LINE1
Rear lower right of TV/DVD (LINE 1 IN)
VIDEO IN
AUDIO IN (L)
To Audio/
AUDIO IN (R)
Video OUT
Audio/Video cord (not supplied)
S-Video cord (not supplied)
or
To Audio/Video OUT
Audio/Video cord (not supplied)
47
(continued)
To S-Video IN
Left side of TV/DVD (LINE 2 IN)
AUDIO IN (R)
AUDIO IN (L)
VIDEO IN
4/25/05, 17:26
47