Playback Procedure - Electrohome 20EV701 Manuel D'instructions

Téléviseur avec écran tft à cristaux liquides de 20” et lecteur dvd

Table des Matières

Les langues disponibles

All manuals and user guides at all-guides.com

NOTES:

• If a non-compatible disc is loaded,

"Incorrect Disc", "Region Code Error"

or "Parental Error" will appear on the TV

screen according to the type of loaded

disc. If these appear, check your disc

again (see pages 8 and 39).

• Some discs may take a minute or so

to start playback.

• A "Prohibition" symbol

may appear

at the upper left of the screen. This

symbol means either the feature you

tried is not available on the disc, or the

unit can not access the feature at this

time. This does not indicate a problem

with the unit.

• When you set a single-faced disc label

downwards (ie. the wrong way up),

"Reading" will appear on the display

and then "Incorrect Disc" will be

displayed.

• Some playback operations of DVDs

may be intentionally fixed by software

producers. Since this unit plays DVDs

according to the disc contents the

software producers designed, some

playback features may not be available.

Also refer to the instructions supplied

with the DVDs.

5N10721A_EN_P27-32

Press TV/DVD to select DVD mode.

Place the disc in the disc

slot with the label side

facing forward. (If the disc

has a label.) Hold the disc

without touching either of

its surfaces, align it with

the guides, and place it in

position.

On the screen, "No Disc"

changes to "Reading" and

then playback will

commence.

• A menu screen may

appear on the TV screen,

if the disc has a menu

feature. In this case,

press

ENTER to operate a

menu feature.

Press STOP to end playback.

• The unit memorizes the stopped point, depending on

the disc. "

resume playback (from the scene point).

• If you press STOP again ("

or unload the disc, the unit will clear the stopped point.

Press 5 5 5 5 5 (EJECT).

Remove the disc and then press POWER.

The unit turns off.

When you eject the disc, you may hear mechanism noise,

but it is not malfunction.