Contrast Setting - IFM Electronic AS-i AC1311 Notice De Montage

Contrast setting

The contrast can be directly changed by simultaneously pressing the
right button and the ∆-button (too bright) or the ∇−button (too dark).
ifm electronic
Controller E
MENU
∆
increase contrast
Operation
To operate an AS-i system a special AS-i power supply is required.
Connection is made to the terminals AS-i + and AS-i -.
Disconnect the power supply before connecting the controller
The AS-i system is operated ungrounded. AS-i + and AS-i - are to
be symmetrical to the ground potential of the installation. Ensure
a low resistance connection of the symmetry point of the AS-i
power supply (terminal shield) to the ground of the installation.
12
PAGE
All manuals and user guides at all-guides.com
USER
ifm electronic
Controller E
MENU USER
∆
decrease contrast
.
e