KETRON MIDI PRO Guide Pratique page 37

U S B: P E N D R I V E S A N D C O M P UTE R
Via the 3 USB slots on the right hand side of the instrument, the MIDJPRO is able the play or manage files on pen drives.
When you press the key MEDIA a screen is displayed showing the devices installed in the instrument or connected via
the USB ports. The following functions are displayed at the bottom of the screen:
- EJECT: Removes the device selected, except for the internal SSD of the instrument (User FS). This is the same safe
hardware removal function that you have on your computer, which protects devices connected from any damage that may
occur if they are removed when data is being written to a file. Once the modifications have been made on the peripheral
(saving a Midi file, copy, etc..) before removing the pen drive, press Eject to ensure that the modifications have actually
been saved.
- PC-CONNECT: This function permits a computer connected by USB cable to the USB Device of MIDJPRO to read
all the storage devices installed on the MIDJPRO and those connected to the USB Host ports. Once the connection has
been enabled, the computer will read the internal SSD of the instrument and the internal optional Hard Disk that may be
installed in the MIDJPRO as well as any devices connected to the instrument via the USB Host ports, such as a Pen Drive.
Press the PC CONNECT function to disable the connection. A message will appear warning you to remove the hardware
from the computer safely in order to avoid damage.
- DISK EDIT: This enables a number of functions for the files selected in the lower bar.
- INFO: Shows information relevant to the drive selected.
- REFRESH: Carries out another scan of all the disks and USB peripherals connected. If the machine does not
automatically read a connected USB pen drive, this function restarts detection of the peripherals and devices connected.
/35