KETRON MIDI PRO Guide Pratique page 36

S O U N D S
Press the key VOICE to access the mode which allows you to select and manage the instrument sounds.
The 12 instrument categories are displayed on the right of the main screen while the 8 pictures of 8 different types of
instruments in the category selected are displayed at the centre. Each category consists of several pages and it is possible
to toggle from one to another with the Dial.
After selecting the tone or Voice, you can access an edit window by selecting EDIT on the display.
Select the key SPLIT to set on the keyboard connected to the Midi In input, the split point that divides the Upper section
from the Lower section. The value you set is displayed on the virtual key.
The instrument can overlap up to 4 sounds over the full range of the keyboard or in the Upper section on the right
of the split point. The fourth layer is called 2ND VOICE and may be enabled or disabled quickly directly from the main
screen of Voice mode, by selecting the virtual key 2ND.
/34