KETRON MIDI PRO Guide Pratique page 22

S A F E T Y I N STR U CTI O N S
RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS.
Caution: to reduce the risk of fire or electric shock, do not expose the instrument to rain or humidity.
IMPORTANT INSTRUCTIONS FOR SAFETY AND INSTALLATION
CAUTION – When using an electrical product it is important to take a number of precautions such as the following:
• Read the Instruction Manual before using the instrument.
• An adult should always supervise children when they play the instrument.
• Do not use the instrument in areas subject to seepage or water spray, such as next to a sink, a swimming pool, on a damp surfaces
etc.; do not place containers with liquids on the instrument to prevent accidental seepage of liquid into the instrument.
• The instrument should be used only on a stand recommended by the manufacturer.
• Do not use the instrument at a very high volume for long periods of time: very high noise levels are dangerous to health.
• Position the instrument in such a way as to ensure appropriate ventilation.
• Keep the instrument away from heat sources such as central heating radiators, stoves etc.
• Connect the instrument to the mains only with the mains adapter. You will find the identification and power supply details under
the instrument.
• Disconnect the power supply cable if the instrument is not to be used for a long period of time.
• If necessary, disconnect the instrument using the power supply switch on the back panel. When positioning the instrument,
always ensure that this switch is easy to reach.
• Take the instrument to a service centre if:
a. the power supply cable or plug are damaged.
b. objects or liquid have fallen into the instrument.
c. the instrument has been exposed to rain.
d. the instrument is not functioning properly or performance is impaired.
e. the instrument has been dropped or the chassis is damaged.
• Never attempt to repair the instrument on your own; all repairs should be carried out by a qualified technician.
KEEP THIS INSTRUCTION MANUAL IN A SAFE PLACE
PREVENTING RADIO/TV DISTURBANCE
This instrument operates on the radio frequency band. If it is not installed correctly and strictly in compliance with the instructions
provided it may disturb the reception of radio-television appliances. Although the instrument you have purchased has been designed in
compliance with applicable laws and in such a way as to provide reasonable protection against such disturbances, there is no guarantee
that these will not occur. To check whether any disturbance you are experiencing is in fact produced by your instrument, turn it off to
see if the disturbance disappears. Turn the instrument on again to see if the disturbance reappears. Once you are certain that your
instrument is in fact causing the disturbance, take any of the following measures:
• Adjust the antenna of the radio or TV receiver.
• Place the instrument in a different position with respect to the radio or TV receiver.
• Place the instrument further away from the receiver.
• Connect the plug of the instrument to another socket so that the instrument and the receiver are connected to two different circuits.
• If necessary, call in a servicing technician.
POWER SUPPLY
• When you connect the instrument to other appliances (amplifier, mixer, Midi instruments etc.), ensure that all the units are off.
• Read the recommendations regarding Radio and TV disturbances.
INSTRUMENT CARE
• Clean the surfaces of the instrument with a soft dry cloth. Never use gasoline, diluting agents or solvents of any kind.
OTHER PRECAUTIONS
If you wish to use your instrument in a foreign country and have doubts about the power supply, consult a qualified technician before you
leave. The instrument should never be subjected to strong shocks.
CURRENT ADAPTERS
When connecting this instrument to the mains socket, use only the KETRON current adapter supplied with the instrument.
The use of different current adapters may damage the power supply circuits of the instrument. It is therefore of fundamental importance
to use only an original adapter, requesting the correct model when ordering a new adapter.
INFORMATION FOR USERS
"Implementation of Directive 2002/95/CE, 2002/96/CE and 2003/108/CE on reduced use of dangerous substances
in electrical and electronic appliances and waste disposal".
The crossed bin symbol shown on the appliance means that at the end of its life the instrument must be disposed of separately
from other waste. At the end of its life the user should therefore take the instrument to a separate waste centre for electronic
and electrical products, or return the same to the dealer when purchasing a new and similar instrument, whichever is applicable.
Disposing of the instrument correctly so that it may be consequently recycled and disposed of in an environmentally compatible
manner helps to prevent possible negative effects to the environment and health and ensures that the components of the
instrument are recycled. Unauthorised disposal of the product by the user entails the application of administrative penalties.
/20