LML Star 4T Notice De Mode D'emploi Et D'entretien page 92

4.3.2 Clean the battery thoroughly from the
outside.
4.3.3 Put the battery in the battery box.
4.3.4 Connect the fastener belt first to the lower
hook, then hold the battery firmly with one
hand, stretch the belt and fasten it in the
upper hook. Re-check if the battery is fas-
tened firmly (Fig. 46).
4.3.5 Re-fix battery bleeder tube and ensure
that it is routed properly through its clamp.
4.3.6 Fix the "Positive" (+) terminal first and
then the "Negative" (–) terminal.
4.3.7 Make sure the battery cable does not
touch any metallic surface during fitment.
4.3.8 Apply grease around the terminals to pre-
4.3.9 Ensure, Protection cap provided on bat-
Caution:
Al ways ensur e that the bleeder tube is not
clogged, cri mped or bent. The t ube must be
of an adequat e l engt h. Repl ace the bleeder
tube in case it is not of correct lengt h or it is
clogged, or bent.
Fig. 45
vent corrosion.
tery harness is fixed properly on positive
(+) terminal of battery.
Care and Maintenance
Fig. 46
36