Table Des Matières; Introduction; Intended Use - Parkside PSSA 18 A1 Traduction Des Instructions D'origine

GB IE
Content
Introduction ................................. 4
Intended Use ................................ 4
General Description ...................... 5
Scope of delivery .............................. 5
Overview ......................................... 5
Function Description .......................... 5
Technical Data .............................. 5
Notes on Safety ........................... 6
Symbols ........................................... 6
General safety instructions for power
tools ................................................ 7
Special Safety Directions for the device 9
Correct handling of the battery charger . 11
Charging the battery .................. 12
Removing/inserting the battery ......... 12
Recharging the battery ..................... 12
Used batteries ................................ 13
Assembly ................................... 13
Installing/changing the blade ........... 13
Operation .................................. 13
Switching on and off ....................... 14
Adjusting the base plate .................. 14
Switching on/off the oscillating function 14
Checking the charge status of the re-
chargeable battery .......................... 14
Practical tips ................................... 15
Cleaning/Maintenance ............... 16
Cleaning ........................................ 16
General maintenance ...................... 16
Storage ...................................... 16
Waste Disposal/
Environmental Protection ........... 16
Guarantee ................................. 17
Repair Service ............................ 18
Service-Center ............................ 18
Importer .................................... 18
Spare Parts/Accessories ............. 19
Trouble Shooting ........................ 20
Translation of the original EC
declaration of conformity ........... 78
Exploded Diagram ..................... 81
4
All manuals and user guides at all-guides.com

Introduction

Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product. During production,
this equipment has been checked for qual-
ity and subjected to a final inspection. The
functionality of your equipment is therefore
guaranteed.

Intended Use

The device is suitable for light and medium
sawing through wood, plastic and plaster-
board. If a separately available saw blade
is used, it is also possible to saw through
metal. The device is not suitable for com-
mercial use.
Any other use that is not explicitly ap-
proved in these instructions may result in
damage to the equipment and represent a
serious danger to the user.
The operator or user is responsible for ac-
cidents or damage to other people or their
property. The manufacturer is not liable
for damages caused by unspecified use or
incorrect operation.
The operating instructions constitute
part of this product. They contain
important information on safety, use
and disposal.
Before using the product, familiarise
yourself with all of the operating
and safety instructions. Use the
product only as described and for
the applications specified. Keep this
manual safely and in the event that
the product is passed on, hand over
all documents to the third party.