Operation - Goobay 58976 Mode D'emploi

All manuals and user guides at all-guides.com
3. Connect the outputs of the source devices such as HD-
4. Connect the inputs of the HD output devices to the outputs
5. Alternatively or additionally, you can connect audio output
6. Connect the included power supply (14) with the DC socket
Fig. 6: Connecting
4.2

Operation

-
a) Selection via selection button
For outputs A and B there are separated selection buttons
available for source devices 1-4.
-
If a source device is detected, the corresponding LED lights up
red on the display (4).
-
The selection of the input signal and it´s source device 1 - 4
takes place in a cyclic order:
DVD, PS3, etc. to the inputs (9) of the Ultra HDMI™ Matrix
4 x 2 by HDMI™ cable.
(8) of the Ultra HDMI™ Matrix 4 x 2 by HDMI™ cable.
devices also on optical output (Toslink, 10) or coaxial audio
output (RCA, 11) for digital transmission of signals or on
analogue audio output (RCA, 12) for analog transmission of
signals.
(13) o f the Ultra HDMI™ Matrix 4 x 2 and then to a mains
socket.
Press the ON/OFF switch to turn on the matrix.
Select the desired output by pressing the corresponding
button A / B (6).
Press the selection button again to switch to the next input
channel.
16