Sharp FO-5800 Mode D'emploi page 148

Optional Settings
Setting 05: TRANSACTION REPORT PRINT SELECTION
This sets the condition for printing out a Transaction Report. Enter a
number from 1 to 5 as follows:
1 (ERROR/TIMER
MEMORY):
2 (SEND ONLY)
3 (ALWAYS PRINTS)
4 (NEVER PRINTS)
.
5 (ERROR ONLY)
♦ Initial setting: 5
Setting 06: RECALL TIMES
This sets the maximum number of times your fax will automatically
redial if the line is busy. Enter any number from 00 to 14.
♦ Initial setting: 02
Setting 07: RECALL INTERVAL
This sets the amount of time your fax will wait between automatic
redials when the line is busy. Enter 01 for 1 minute, 02 for 2 minutes,
etc., up to a maximum of 15 minutes.
♦ Initial setting: 05
Setting 08: SECURITY SELECTION
Press 1 (ON) to turn polling security on, or 2 (OFF) to turn it off.
♦ Initial setting: 1
146
All manuals and user guides at all-guides.com
A report will be printed after an error,
timer operation, or memory operation
A report will be printed only after a
transmission
A report will be printed after each
transmission, reception, or error
A report will never be printed.
A report will be printed only after an error
occurs