LG F0L2CRV2T2 Manuel Du Propriétaire page 33

Masquer les pouces Voir aussi pour F0L2CRV2T2:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

MAINTENANCE
WARNING
• Unplug the appliance before cleaning to avoid the risk of electric shock. Failure to follow this warning
may result in serious injury, fire, electric shock, or death.
• Never use harsh chemicals, abrasive cleaners, or solvents to clean the appliance. They may damage
the finish.
Cleaning After Every Wash
Care After Wash
• After the wash cycle is finished, wipe the door
and door seal to remove any moisture.
• Leave the door slightly open to dry the drum.
• Wipe the appliance with a dry cloth to remove
any moisture.
Cleaning the Exterior
Proper care of your appliance can extend the
service life.
Door
Wash with a damp cloth on the outside and inside
and then dry with a soft cloth.
Exterior
Immediately wipe off any spills. Wipe with a damp
cloth.
WARNING
• Do not attempt to separate any panels or
disassemble the appliance. Do not apply any
sharp objects to the control panel in order to
operate the appliance.
Cleaning the Interior
• Use a towel or soft cloth to wipe around the door
opening and door glass.
• Always remove items from the appliance as
soon as the cycle is complete. Leaving damp
items in the appliance can cause wrinkling,
colour transfer, and odour.
Cleaning the Appliance
Periodically
Tub Clean
This function is used to clean inside of the
appliance.
A higher water level is used in this programme at
higher spin speed. Run this function once a month
(or more often if needed) to remove detergent
buildup and other residue.
1
Remove any clothing or items from the
appliance and close the door.
2
Open the dispenser drawer and add
anti-limescale powder to the main wash
compartment.
• Put tablets into the drum.
EN
33

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

F0l2crv2t2c

Table des Matières