Operating Principles; Check Before Ride; The Electrical Use And Maintenance - ElectricSA ESA1001ZB Guide Du Propriétaire

All manuals and user guides at all-guides.com

OPERATING PRINCIPLES

To operate you must be pedaling forward. You cannot shift
derailleur gears when you are stopped or when pedaling
backwards. Before shifting ease up on your pedaling pressure.
For a smooth gear change when approaching a hill, shift to a
lower gear BEFORE your pedaling speed slows down too much.
When coming to a stop, shift to a lower gear first so it will be
easier when you start riding again. If, after selecting a new gear
position, you hear a slight rubbing noise from the front or rear
gears, some adjustments may be necessary. Gently adjust the
appropriate shifter using the barrel adjusters until the noise
goes away. For optimal performance and extended chain life, it
is recommended that you avoid using the extreme
combinations of gear positions for extended periods. It is
recommended that a trained bicycle technician perform all
adjustments to the shifters and Derailleur.

CHECK BEFORE RIDE

1. The battery must be filled for the first-time use.
2. Check if the brake system works.
3. Whether the tire pressure is normal or not, whether there are
any worn out of the surface; and whether the screws of the
wheels are tight or not.
4. Handlebar and seat according to the requirements of the
rider, the quick release and locking screws.

THE ELECTRICAL USE AND MAINTENANCE

Proper use and maintenance of engine, control, and battery
1. Engine: do not dismantle and disassemble the parts and
fitting of the EAB by yourself to avoid affection of features of
the motor and service's life.
2. Controller: It is forbidden to wash the controller by water. It's
forbidden to disassemble the motor by yourself, please call our
-
after sale service Mecanair: 1 866-206-0888
25