How To Charge A Battery; When Should Charge The Battery - ElectricSA ESA1001ZB Guide Du Propriétaire

All manuals and user guides at all-guides.com

HOW TO CHARGE A BATTERY

The charger's input range is between 110V - 240V AC (depends
on the standard in different countries and regions), the charger
is specially used for charging the ElectricSA battery.
1. Connect the charger to the battery
2. Plug the charger to an outlet.
3. Now the red light on the charger turns ON.
4. After 4-6 hours, the charger light turns green, indicating that
the load reaches the end and enters a float charge
protection. Now, disconnect the charger plug. Always
disconnect the charger from the wall outlet first then
disconnect the charger from the battery.
CAUTIONS!
Keep the battery out of the reach of children.
When the battery is not charged, please unplug the charger
from the battery. Please use the charger supplied by ElectricSA,
another type of charger may affect the service life of the battery,
damage the battery or its components. Do not disassemble the
charger, high voltage circuits are inside. This charger is for
indoor use. Please use in a dry and airy environment, pay
attention and be careful in wet and vibrations places.

WHEN SHOULD CHARGE THE BATTERY?

It is recommended to charge the battery if necessary. For
example, if you use your EAB for short periods of time and short
trips, the battery can be recharged after several outputs.
However, if you plan a long hike of 40 km or more, it is
recommended that you charge your battery. In general, if your
charge indicator on the handlebars or on the battery indicates
that it is less than 50% load, it is recommended to charge.
21