Assemble The Bike (Esa1202Zw) - ElectricSA ESA1001ZB Guide Du Propriétaire

All manuals and user guides at all-guides.com

ASSEMBLE THE BIKE (ESA1202ZW)

1. Unpack the bike; remove all the bubble bags and zippers.
Handle bar, front wheel, saddle, pedals and lights are to be
assembled.
2. Unscrew the 4 screws in the frame by the Allen key, place
the handle bar in the middle and tighten the screws.
Note: the handle bar should be placed in the middle to ensure
that it is the same length on both sides.
3. In order to avoid damage to the battery when assembling
the front wheel, please remove the battery first. Turn off
the switch on the battery. Turn the key anti-clockwise and
pull gently the battery to remove it.
11