2.1
DISPLAY MENU
Description
Access this menu to screen settings.
Position the "Active Frame" on the "DISPLAY" icon and press "ENTER".
The following window will appear:
This page contains the basic menu settings.
The selected item is highlighted.
Press arrows "◄►▲▼" to point the cursor to the various menu items.
Point the cursor to the required item and press "ENTER" to edit it. Use buttons "▲▼" to change the available options for the
selected menu item.
Select "CONFIRM" and press "ENTER" to make the changes effective.
Select "CANCEL" and press "ENTER" to cancel the changes.
Press "ESC" to go back by one step.
Press "ESC" several times until the configuration window closes to quit the configuration menu.
2.1.1
DISPLAY MENU BASIC SETTINGS
2.1.1.1
Language
Use "▲▼" to select the language in this menu.
2.1.1.2
Device ID
This option can be used to assign an address to the DVR for controlling it with a remote control.
Define a different address for each device if several DVRs are installed, otherwise the remote control will control all DVRs with
the same address at the same time.
The default address is "01".
Use keys 09 on the front panel to edit the device ID address.
The address must be from 1255.
2.1.1.3
Require password
This option can be used to enable or disenable password request for the following functions:
Menu
This function enables/disenables password request when the configuration menu is accessed.
PLAYBACK
This function enables/disenables password request when playback is started/stopped.
RECORDING
This function enables/disenables password request when recording is started/stopped.
PTZ
This function enables/disenables password request when the PTZ menu is accessed.
Press "ENTER" or "EDIT" to enable or disenable the password.
Symbol "" indicates that a password is required; symbol "×" indicates that a password is not required. The password is enabled
by default.
DS1093-029
All manuals and user guides at all-guides.com
Figure 24: display menu
38