Installing Your New Appliance - AVG ARBM150SE Mode D'emploi

7

Installing your new appliance

Before using the appliance for the first time,
you should be informed of the following tips.
Warning!
For proper installation, this refrigerator
must be place d on a level surface of hard
●
material that is the same height as the rest
of the flooring. This surface should be
strong enough to support a fully loaded
refrigerator.
The rollers, which are not castors, should
be only used for forward or backward
movement. Moving
sideways may damage your floor and the
rollers.
Ventilation of appliance
In order to improve efficiency of
the cooling system and save
energy, it is necessary to maintain good
ventilation around the appliance for the
dissipation of heat. For this
sufficient clear space should be
available around the refrigerator.
Suggest: We recommend there be at
least 2 inches of space from the back of
appliance to the wall, at least 3.9 inches
from its top, at least 2 inches from its
cabinet side, It's necessary that to allow a
clear space in front and side to allow the
doors to open 130°. As shown in follow
diagrams.
the refrigerator
reason,
3.9"
2"
27.4"
Note:
This appliance performs well within the
ambient temperature from 50℉(10℃) to
109℉(43℃). It may not work properly if
being left at a temperature above or below
the indicated range for a long period.
Install your appliance in a dry place to
avoid high moisture.
Keep the appliance out of direct sunlight,
rain or frost. Install the appliance away from
heat sources such as stoves, fires or
heaters.
3.9"
2"
2"
27.6"
2"
45.5"