Haussmann CK104-CS Manuel De L'utilisateur page 26

Scie à découper 14 po
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

TROUBLESHOOTING
WARNING! To avoid any accidental starting of the saw, turn the switch to the "OFF"
position, remove the safety key, and unplug the tool from the AC power source.
Should the motor fail to run, for any reason, call Customer Service.
TROUBLE
Cut-off saw will
not start
Cut-off saw
makes
unsatisfactory
cuts
Cut-off wheel
does not come up
to speed
Cut-off saw
vibrates exces-
sively during cut
Cut-off saw does
not make accurate
cuts
Cannot move cut-
off saw arm
Material moves
during cutting
26
CK104-CS
PROBABLE CAUSE
1. Tool not plugged in
2.Tripped circuit breaker or
blown fuse
3.Power cord damaged
4.Worn or damaged
carbon brushes
1.Glazed cutting wheel
2.Workpiece incorrectly
clamped in vise
1.Extension cord too light
or too long
2.Low voltage from AC
power source
1.Saw not mounted
securely to workbench
2.Damaged cut-off wheel
3.Workpiece incorrectly
clamped in vise
1.Fence improperly adjusted
2.Cut-off wheel not square
to fence
3.Excessive force used to
make cut
4.Workpiece moving
1.Auto retracting wheel
guard binding
1.Fence slipping or work-
piece incorrectly clamped
2.Vise not securely clamp-
ing workpiece
3.Excessive force used to
make cut
SOLUTION
1.Plug in cut-off saw.
2.Reset circuit breaker or
replace fuse.
3.Have power cord replaced by
authorized service center.
4.Replace carbon brushes.
1.Dress the wheel or replace
with a new one.
2.Securely clamp and support
workpiece.
1.Replace cord.
2.Consult certified electrical
contractor.
1.Tighten all mounting hard-
ware. See Figure 1.
2.Replace cut-off wheel.
3.Clamp workpiece securely in
vise.
1.Inspect and adjust fence.
2.Inspect and adjust wheel.
3.Reduce pressure on cuts - let
wheel do cutting.
4.Clamp workpiece securely in vise.
1.Check for damaged parts.
Repair or replace as needed.
1.Tighten fence.
2.Clamp workpiece securely in
vise.
3.Reduce pressure on cuts - let
wheel do cutting.
!

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

68125085

Table des Matières