Pre-Installation - K2 Pumps UTT05001K Manuel Du Propriétaire

WARNING
PERSONAL INJURY and/or PRODUCT DAMAGE
1. Do not touch the motor when operating. The motor is designed to operate at high temperatures. Turn the pump
OFF, unplug, and allow the motor to cool before handling.
2. Do not operate this pump while unattended.
3. Never run pump dry. Pump must be primed before operating.
4. Provide a means of pressure relief if the pump discharge can be shut off or obstructed. Pumps operating with a
closed discharge can create hot liquid, which can cause burns.
5.
This pump is equipped with an automatic thermal overload and can restart without warning.

PRE-INSTALLATION

Part
A
B
SPECIFICATIONS
Horsepower
Electrical Rating
Power Cord Length
Discharge Port
For Professional Technical Support call 1-844-242-2475
DESCRIPTION
Pump
Hose Strainer
A
B
1/2 HP
120VAC / 60Hz / 7A
10'
3/4" Garden Hose Thread
QUANTITY
1
1
3