Setting A Programme - Electrolux EWF 1064EMW Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

B
2. Adjust the flap in position B.
3. Put back the drawer in the recess.
When you use the liquid
detergent:
• Do not use gelatinous or
thick liquid detergents.
• Do not put more liquid
then 120 ml.
• Do not set the
programme with
prewash.
• Do not set the delay start.
When the flap is in position B and you want
to use powder detergent:
1. Remove the drawer.
2. Adjust the flap in position A.
3. Put back the drawer in the recess.

10.5 Setting a programme

1. Turn the programme knob and set
2. If necessary, change the temperature
10.6 Starting a programme
without the delay start
Press
A
10.7 Starting a programme with
the delay start
1. Press
The related indicator comes on the
display.
the programme:
• The indicator
• The display shows the level of the
Time Manager, the programme
duration and the indicators of the
phases of the programme.
and the spin speed or add available
options. When you activate an
option, the indicator of the set option
comes on.
If you set something
incorrect, the display shows
the message
.
• The indicator of
and stays on.
• The indicator
on the display.
• The programme starts, the door
locks, the display shows the
indicator
.
• The drain pump can operate for a
short time when the appliance fills
water.
After approximately 15
minutes from the start of the
programme:
• The appliance adjusts
automatically the
programme duration
agree with the laundry
load.
• The display shows the
new value.
again and again until the
display shows the delay you want to
set.
ENGLISH
15
flashes.
.
stops to flash
starts to flash

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Ewf 1264emw

Table des Matières