Acoustic Signals; Before First Use; Daily Use; Loading The Laundry - Electrolux EWF 1064EMW Notice D'utilisation

until the indicator
off.
You can activate this option:
• After you press
the programme knob are locked.
• Before you press
cannot start.
8.2 Permanent Extra Rinse
With this option you can permanently
have an extra rinse when you set a new
programme.
• To activate/deactivate this option
press

9. BEFORE FIRST USE

1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Put a small quantity of detergent in
the compartment for washing phase.
4. Set and start a programme for cotton
at the highest temperature without
laundry.

10. DAILY USE

WARNING!
Refer to Safety chapters.

10.1 Loading the laundry

1. Open the appliance door
2. Shake the items before you put them
in the appliance.
3. Put the laundry in the drum, one item
at a time.
Make sure not to put too much laundry in
the drum.
4. Close the door firmly.
comes on/goes
: the options and
: the appliance
and at the same time
until the indicator
off.

8.3 Acoustic signals

The acoustic signals operate when:
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic
signals, press
time for 6 seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
This removes all possible dirt from the
drum and the tub.
Make sure that no laundry
gets caught between the
seal and the door to avoid
risk of water leakage and
damage to the laundry.
Washing heavily oiled,
greasy stains could cause
damage rubber parts of the
washing machine.
ENGLISH 13
comes on/goes
and at the same