Acoustic Signals; Before First Use; Daily Use; Loading The Laundry - Electrolux EWF 1084BMW Notice D'utilisation

12 www.electrolux.com
Activate this option after you touch the
button
(except for the button
This option stays active even
when you switch off the
appliance.

8.3 Acoustic signals

The acoustic signals operate when:

9. BEFORE FIRST USE

1. Put a small quantity of detergent in
the compartment for washing phase.
2. Set and start a programme for cotton
at the highest temperature without
laundry.

10. DAILY USE

WARNING!
Refer to Safety chapters.

10.1 Loading the laundry

1. Open the appliance door
2. Put the laundry in the drum, one item
at a time.
3. Shake the items before you put them
in the appliance.
Make sure not to put too much laundry in
the drum.
4. Close the door firmly.
: the buttons are locked
) .
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic
signals, touch the buttons
the same time for 4 seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
This removes all possible dirt from the
drum and the tub.
CAUTION!
Make sure that no laundry
stays between the seal and
the door. There is a risk of
water leakage or damage to
the laundry.
10.2 Using detergent and
additives
1. Measure out the detergent and the
fabric conditioner.
2. Put the detergent and the fabric
conditioner into the compartments.
3. Carefully close the detergent drawer
and at