Setting A Programme - Electrolux EWF 128500 H Notice D'utilisation

16 www.electrolux.com
1.
3.

10.5 Setting a programme

1. Turn the programme knob to switch
the appliance on and set the
programme:
• The indicator of the button
• The display shows the programme
2. If necessary, change the temperature
and the spin speed or add available
options. When you activate an option,
the indicator of the set option comes
on.
10.6 Starting a programme
without the delay start
Press the button
• The indicator of the button
flashes.
duration.
If you set something
incorrect, the display shows
the message
.
stops to flash and stays on.
2.
4.
10.7 Starting a programme with
the delay start option
1. Press the button Départ Différé again
.
2. Press the button
• The programme starts, the door
locks, the indicator
• The programme time decreases
with steps of one minute.
The drain pump can operate
for a short time at the
beginning of the washing
cycle.
and again until the display shows the
delay you want to set. The delay start
indicator comes on.
• The door is locked and the
indicator is on.
• The appliance starts the
countdown.
• When the countdown is
completed, the programme starts
automatically.
is on.
: