Usb Settings - Keysight DAQ970A Guide D'utilisation

USB Settings

USB Settings configures the front panel USB (storage) and rear panel USB (connectivity) connectors
Front panel
Press [Home] > User Settings > I/O > USB Settings
USB SCPI
USB SCPI enables (On) or disables (Off) the instrument's USB control port on the rear panel. Once the interface state
is changed, you must cycle the instrument power for the change to take effect. When disabled, the interface cannot
be configured in the Keysight IO Libraries Connection Expert utility.
Easy File Access (File Access Softkey)
Easy File Access allows you to easily transfer files between the instrument and your PC. Simply connect the rear
panel USB control port on the instrument to a USB port on your PC and then use the window that appears on your
PC to copy files from the instrument to your PC.
You can use your PC's standard file management features to copy files from the instrument to your PC.
Keysight DAQ970A/DAQ973A User's Guide
1 Introduction to the Instrument
Remote interface
SYSTem:COMMunicate:ENABle {OFF | ON}, USB
29