Keysight DAQ970A Guide D'utilisation page 141

2. Press [Channel] and use the knob or the front panel arrow keys to select the DAC output channels (channel 04
and 05) or the DAC sense channels (channel 06 and 07).
3. Press In Scan to specify whether to include (On) or exclude (Off) the DAC channel from the scan list.
4. Press Sourcing to set the output mode in the DAC output channel to Voltage or Current.
5. Toggle Lock (On) to lock the DAC output channel mode or toggle Lock (Off) to disable the lock on the DAC out-
put channel mode.
6. Press Write > Output to set the output voltage/current level, and then press Write Output to output the voltage/-
current from the selected DAC output channel.
Keysight DAQ970A/DAQ973A User's Guide
3 Features and Functions
141