Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Programme
3)
ECO 50°
PREWASH
1) The consumption values are intended as a guide and depends on the pressure and the temperature of the water
and also by the variations of the power supply and the amount of dishes.
2) Ideal for washing a partially loaded dishwasher. This is the perfect daily programme, made to meet the needs
of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery.
3) Test programme for test institutes.
4) This programme does not require the use of detergent
Select and start a washing programme
1. Check that the baskets have been loaded correctly and that the spray arms are free to
rotate
2. Check that the water tap is opened
3. Close the dishwasher's door.
4. Turn the programme knob until the programme marker corresponds with the desired
programme (see "Washing programmes" chart).
– The On/Off indicator light illuminates.
– The indicator lights of the phases foreseen for the programme start flashing.
5. Press the START/RESET button, the programme starts automatically and the START/
RESET indicator light illuminates.
– As soon as the programme starts, the phase indicator lights turn off except for the
indicator light for the phase in progress which will remain lit.
During the running of the programme, it is not possible to change the selection made by
turning the programme knob in correspondence of another programme or the Off position.
If you want to change the running programme you must cancel the selection made (see
"Cancel a washing programme in progress").
Setting and starting the programme with "delay start"
• Allows the start of the programme to be delayed by 3 hours.
1. After having selected the washing programme, press the delay start button.
Degree of
Type of load
soil
Normal soil Crockery and
cutlery
Any
Partial load
(to be com-
pleted later in
the day)
Select and start a washing programme
Programme description
4)
73
Consumption val-
1)
ues
Publicité
Chapitres
Table des Matières
