8
Power adapter
9
USB cable and connector
10 Pedal set cable and connector
SETTING UP YOUR RACING WHEEL
Place the racing wheel on a table or a desktop
1. Place the racing wheel on a table or any other horizontal, flat and stable surface.
2. Insert the fastening screw (12) in the attachment system (11), then tighten the fastening screw (by
turning it counter-clockwise) so that it feeds into the large threaded hole located beneath the racing
wheel, until the device is perfectly stable.
WARNING: Never tighten the screw alone, without the attachment system!
(You risk damaging your racing wheel!)
2/12
11 Attachment system
12 Metal fastening screw