Binatone Solo Plus Mode D'emploi page 47

No display
Try recharging or replacing the rechargeable battery pack.
Reset the base. Unplug the unit's electrical, then plug it back in.
If the LED is not lit up, then try to unplug the unit's
electrical power, and then plug it back in.
If the handset disconnects from the base during a phone call
Check that the power cord is connected properly into the
base.
Check that the power adapter is connected properly into the
electrical outlet.
Move the handset closer to the base. It may be out of range.
Reset the base by unplugging the unit's electrical power.
Reset the handset by unplugging and re-plugging its battery pack.
Wait for around 15 seconds and re-plug the power again. Allow up to
one minute for the handset to synchronize with the registered base
again.
Noise interference on your radio or television
Your base or charger may be too close. Move it as far
away as possible.
47