Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
11.7
Remote Access
The phone lets you listen to the messages on your answering machine, or
otherwise operate your answering machine by calling in to your
answering machine from another touch-tone phone.
You need to enter a remote access code (same as your SECURITY CODE)
to access your answering machine remotely.
Remote Access always SECURITY CODE be enabled you can to use this
feature in any time.
11.7.1
Access the Answering Machine Remotely
1.
Dial your phone number from any touch-tone phone.
2.
When your answering machine answers your call and starts playing
your outgoing message, press the < # > key.
•
The outgoing message will stop playing.
3.
Enter your Remote Access Code (same as your security code) within
8 seconds using the numeric keypad on the touch-tone phone.
Note that the answering machine will drop the call if you did not
enter the Master PIN within 8 seconds.
4.
If the code is accepted, you will hear a confirmation tone.
5.
The answering machine will start to playback all the messages on
your answering machine, beginning with new messages.
6.
Use the keypad on the touch-tone phone to carry out the following
operations:
Keys
1
2
3
6
7
8
7.
When you have finished listening to your messages, simply hang up
the phone to end.
Note: If your answering machine is off and Remote Access is always
activated the answering machine will answer your call after 14 rings.
If you enter an incorrect Remote Access Code, you will hear a triple-beep
error tone, and you will need to enter the code again. If you enter the
wrong Remote Code twice consecutively, the call will end automatically.
Repeat the previous message.
Playback messages.
Skip to the next message.
Delete the current message.
Stop message playback.
Turn off the answering machine.
45
Publicité
Table des Matières
