Troubleshooting; Safety Instructions - Extel WESV 82300 Guide D'installation Et D'utilisation

8. TROUBLESHOOTING

With this video surveillance system, you have bought a high technology and ready to use product.
All parts are supplied to use completely your kit.
Nevertheless if you encounter problems or dysfunctions, you can remedy these defects by reading
the following table:
Defect
The monitor does not
turn on
No image
If necessary, our technical website is at your disposal www.cfi-extel.com

9. SAFETY INSTRUCTIONS

The damages caused by the non-compliance to the manual lead to the expiration of the warranty.
We will not assume any responsibility for the resulting damage!
We will not assume any responsibility concerning any damage, to the goods or people, caused by
improper handling or by non compliance with the safety instructions.
This product has been manufactured in compliance with safety instructions. In order to keep
this status and ensuring the best operation of the product, the user must respect the safety
instructions and warnings contained in this manual.
The user of this system is responsible for checking whether the video surveillance is compliant
with the law in force in the country of use.
GB9
All manuals and user guides at all-guides.com
Cause
Power supply problem
• The camera is not powered
•The camera is not in the same
channel as the monitor
• The signal is not received by
the monitor
CFI EXTEL WESV 82300 - 04/2012 - V1
Solution
Check the connection of the
adaptor
• Check the connection of the
adaptor
• Refer to Chapter 4. c.2
• Bring closer the camera and
find a more suitable location