Scan Auto Function; Using An Additional Peripheral (Tv-Monitor); Maintenance - Extel WESV 82300 Guide D'installation Et D'utilisation

All manuals and user guides at all-guides.com
b. SCAN AUTO function
Press the button to activate the automatic scrolling of the cameras. The scrolling time is 5 se-
conds between the cameras and is not modifiable.
(Caution Extel does not distribute additional cameras for this model. But in the case of installing
2 kits, the cameras could be parameterised on 2 different channels and be viewed independently
on the monitors).
c. Using an additional peripheral (TV-Monitor)
This output enables connecting with the supplied RCA cable with yellow (video) and white (audio)
terminal ends a monitor like a TV or another monitor having an « A/V » input.

7. MAINTENANCE

The warranty is void if the parts are dismantled. Clean the outside only with a soft and dry cloth.
Before cleaning, disconnect and switch off the video surveillance system.
Caution: Do not use any acid or alcohol based or other similar cleaning product or solvent. You
may damage the appliance and the vapours are explosive and dangerous for your health.
Do not use any tool which can be voltage conductor (metallic brush, sharp tool...or other) for
cleaning.
1. Turn the monitors off.
2. Connect the two monitors with the RCA/Jack cord
supplied
3. Connect the mini jack cable at the back of the mo-
nitor to the A/V output and the RCA yellow (video)
and white (audio) jack terminal ends (see images
above).
4. Turn the monitors on.
5. Once the mini jack cable is connected at the back
of the monitor, the video is displayed on the additio-
nal monitor without stopping the video of the LCD
monitor as well as its functions.
CFI EXTEL WESV 82300 - 04/2012 - V1
GB8