Console Key Pad Functions - Christopeit Sport RUNNER PRO I Notice De Montage Et D'utilisation

USER MANUAL OF COMPUTER 98301
The instruction of windows and key:
1. Three windows display the details of all functions.
A: left window display:pulse data.
B: right window display:speed data.
C: center window scan or fix display:the data of time, distance ca-
lories an RACETRACK number. When the window display a data,
the LED of the relevant function will light. Press MODE key can se-
lect scan or fix display, When scan display a function, the relevant
LED will coruscate.
D: As playground in the computer sticker is 16 pcs LED of RACE-
TRACK, one cycle is 400M.
E: There are manual mode, time down mode, distance down
mode, calories down mode and the LED of TIME,DIST,LAP,CALO
around the center window.
2. Function key: program, mode, stop/start, speed up, speed
down.
A: PROGRAM key:on the stop status,press program key can se-
lect Program circularly :normal manual mode->time down mode-
>distance down mode->calories down mode->P1->P2->P3->P4-
>P5->P6->fat->normal manual mode->- - -/
B: MODE key:on the no setting status,press MODE key can select
the display of center circularly :fix display of time->fix display of
distance->fix display of calories->fix display of lap number->scan
display time->scan display distance->scan display calories->scan
display lap number->fix display time->- - - when it is in scan ,each
function displays for 5 seconds If on the fat mode,the operation of
MODE key will be recommended in the introduction of FAT.
C: START/STOP key: if stop status, press key,the motor will
running,If start status, press key, the motor will slow stop.
D: SPEED UP key:if setting status,press key will increase setting
value.If the motor running status,press key will up speed value.
E: SPEED DOWN key:if setting status,press key will reduce setting
value If the motor running, press key will down speed value.
3: SPEED shortcut key: 2KM/H,4KM/H,6KM/H,8KM/H,10KM/
H,12KM/H In the motor running, press one of keys will let the
speed of motor as display value .
The instruction of PROGRAM:
1:
The manual mode
mode,distance down mode,calories down mode
2: 6 speed programs: P1,P2,P3,P4,P5,P6.
3: 1 fat test mode
include:normal mode,time
HOW TO START THE COMPUTER:
1: Put the safety key on the relevant place of faceplate, turn the
power switch on,the all segment of LED will light for 2 seconds,
and the Buzzer beep, then into normal of MANUAL MODE.
2: press the START/STOP key, the window of speed display:5-4-3-
2-1,the buzzer beep each seconds, then the motor running.
MANUAL MODE:
1: How to start manual mode:
A: Turn the power switch on,it enter the normal manual mode
B: Put the safety key out faceplate in any status,then Put the safe-
ty key on Faceplate again, it will go into the normal manual mode
and the speed window will display E07 with the buzzer beep each
seconds
C: On stop status,press program key can go into the normal ma-
nual mode
2: Three counter down mode: time down,distance down,calories
down.
A: On the beginning of normal mode,the center window will dis-
play time:0:00,and the relevant LED will light.
B: On the normal manual mode ,Press program key,it will enter
time down mode,the center window will display time,the initial va-
lue is 30:00,press speed up or down key setting value The range
is:8:00-99:00.At the same time, the relevant LED will light.
C: On the time down mode, Press program key,it will enter dis-
tance down mode,the center window will display distance and
light,the initial value:1.0km,at the same time, the distance LED will
light ,press speed up or down key can set the value of distance,
the range is:1.0-99.00km.
D: On the distance down mode ,Press program key,it will enter
calories down mode,the center window will display calories and
light,the initial value:50kcal.At the same time, press speed up or
down key can set the calorie's range :20-9990kcal
RANGE OF ALL FUNCTIONS:
TIME(MIN:SEC)
SPEED(KM/H)
DISTANCE(KM)
PULSE(BPM)
CALORIES(KCAL)
3: THE OPERATION OF MANUAL MODE:
1 press START/STOP key, the motor will start to run, the initial
speed is 1.0km/h.
2 Press speed up or down key to adjust value of speed.
3 press START/STOP key again the motor will be slow down until
stop.
4 press START/STOP again, the speed will increase slowly until
the value as the display in the window.
5 press SPEED shortcut key will adjust speed quickly.
6 Put the safety key out from faceplate,the motor will stop quickly,
the speed window display E07,the buzzer beep each second(the
data of other windows won't change) Put the safety key on
faceplate,all segment of LED light for 2 seconds, then enter normal
manual mode. All parameter reset to zero.
7 When the setting time count down to zero, the speed will be
slow down until stop the buzzer beep each one second for five
times,then the center window change to fix display time, press
START/STOP key,the speed will increase slowly until the value as
the display in the window ,the time will be in counter up.
8 When the setting distance count down to zero, the speed will
slow down until stop the buzzer beep each one second for five
times,then center window change to fix display distance, press
down
START/STOP key,the motor start form 1.0km/h, the speed will
increase slowly until the value as the display in the window ,the
distance will count up.
19
INITAL INITIAL SETTING
VALUE RANGE
0:00 30:00 8:00-99:00
0.0 N/A N/A
0.00 1.00 1.00-99.00
P N/A N/A
0 50 20-9990
DISPLAY
RANGE
0:00-99:59
1.0-12.0
0.00-99.99
40-199
0-9999