Safety In Cleaning And Maintenance; Safety When Using The Pyrolytic Cleaning Cycle - Teka HLB 840 Installation Et Entretien

Safety for cleaning and maintenance
• D isconnect the appliance from the mains power supply be-
fore any operation.
• D o not use steam cleaners or pressurised water to clean the
oven.
• D o not use metal scouring pads, wire brushes or commer-
cially available or abrasive powder cleansers to clean the
oven door as they can scratch the surface and cause the
glass to break.
• C leaning and maintenance tasks to be carried out by the
user should not be done by children without supervision.
• B efore replacing a bulb, first make sure that the oven has
been disconnected from the mains to avoid the possibility of
receiving an electric shock.
• R emove all accessories and dishes from the oven, including
the shelf supports and/or telescopic runners.
• C lean any spillages or excess dirt, as during the pyrolytic
cleaning cycle these could ignite and become a fire hazard.
• F or your safety, never operate the oven without the back
panel (that protects the fan) in place.

Safety when using the pyrolytic cleaning cycle

Before starting the cleaning cycle:
• CAUTION: Remove all accessories and dishes from the oven,
including the shelf supports and/or telescopic runners.
• C lean any spillages or excess dirt, as during the pyrolytic
cleaning cycle these could ignite and become a fire hazard.
• R emove any dirt from the oven gasket.
• C arefully follow the instructions for programming the pyro-
lytic cleaning cycle.
English
Installation & Maintenance
31