Ovens With A Folding Grill; Cleaning The Oven Door; Dismantling/Assembling The Door With Hinge On Body; Dismantling/Assembling The Door With Hinge On Door - Teka HLB 840 Installation Et Entretien

WARNING
For your safety, never operate the oven with-
out the back panel (that protects the fan) in
place.

Ovens with a folding grill

To clean the top part of the oven:
1. Wait until the oven is cold.
2. Push the rail of the grill element (A) with both
hands towards the back of the oven, to re-
lease it from the upper fastening nut (B). Fig-
ure 22.
3. Let the element fall and clean the top part of
the oven. Figure 23.
4. Then put the grill element back in place in its
original position and proceed in the reverse
order.
Ovens with the Teka Hydroclean® function
Please consult the oven User's guide.
Ovens with the Pyrolytic Self-Cleaning
Function
Please consult the oven User's guide.
CLEANING THE OVEN DOOR
For easy cleaning, the door can be dismantled.
To do this, follow the instructions for the type of
door your oven has.
Dismantling/assembling the door with
hinge on body
1. Open the oven door fully.
2. Block the hinge by turning the latches.
Figure 24.
3. Close the door to the locked position. Fig-
ure 25.
4. Hold the door with both hands holding on to
both sides, lift up and pull out the oven door
until the hinges are fully detached Figure 25.
Assembling the door
5. Hold the door with both hands at the lower
part of the sides, insert the hinge arms into
their housings and let the door fall as far as it
will go. Figure 26.
6. Open the oven door fully. Figure 26.
7. Turn the latches back to their original posi-
tion.
WARNING
Make sure the door is inserted completely
by turning the latches. If not, it can become
blocked when trying to close it.
INFORMATION
If the latches are hard to turn, use a flat tool
to turn them.
Dismantling/assembling the door
with hinge on door
1. Open the oven door fully.
2. Block the hinge by turning both latches . Fig-
ure 27.
3. Close the door to the locked position. Figure
28.
4. Hold the door with both hands holding on to
both sides, lift up and pull out the oven door
until the hinges are fully detached. Figure 28.
To assemble the door, carry out the steps in the
reverse order.
English
Installation & Maintenance
37