Warning Symbols; General Safety Instructions; Environmental Protection; Maintenance / Cleaning - Inspire Meshy Manuel D'instructions

FR

1. Warning symbols

ES
PT

2. General Safety Instructions

IT
EL

3. Environmental protection

PL
UA
RO
Ni-MH
BR
EN
TECHNICAL CHARACTERISTICS
Bulb
Battery
Protection class
IP number
Protected against solid foreign objects of
4
5. Operating instructions / Drawings
• The battery can be replaced.
• Short pull to turn on the lamp or change the lumen mode(80LM or 150LM).
• The indicator light will always flicker during charging and turns off when full charged .
• 5V 1A rechargers only .
• Don't use lithium batteries or other non-rechargeable batteries for charging.
• Please charge for 7 hours before first using

6. Maintenance / Cleaning

• The LED's are integrated within the product and cannot be replaced.
• If product not used for a long time, please recharge it once every 3 months to ensure the battery lifetime.
14
Read the instructions.
1. This is not a toy. Keep out of reach of children.
2. Do not immerse the unit in water or other liquids as this will result in permanent damage to
the electrical parts.
CAUTION !
Electrical products must not be thrown out with domestic waste. They must be taken to a
communal collecting point for environmentally friendly disposal in accordance with local
regulations. Contact your local authorities or stockist for advice on recycling. The packaging
material is recyclable. Dispose of the packaging in an environmentally friendly manner and
make it available for the recyclable material collection-service.
The batteries are installed so that they can be removed only by an expert ; batteries are built
into the device, and the device must be disposed of therefore only by a specialist.
IP Level 1st Digit
1,0 mm diameter and greater
LED
3*AA 1.2V 1500MAH Ni-MH Battery
class III
IP 44
IP Level 2nd Digit
Protected against water splashed against
4
the component from any direction