weasy TRC50 Manuel D'utilisation page 9

INSTALLATION GUIDE
Installing and Removing Side Brush:
To install: Remove the side brush caps from the bottom of cleaner. Put the brushes
directly onto the holder and press on the caps to fix it.(Fig. 1)
Then spread the brush bristle evenly as shown in Fig. 3
To remove: Hold the brush bristle and pull upward to remove the brush.(Fig. 2)
Fig. 3
NOTE:
When cleaning on the carpet, please remove the side brushes to prevent from being
worn- out.
PULL UP!
Fig. 2
PULL UP!
Side brush
holder
Fig. 1