Basic Operation - weasy TRC50 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 23
GENERAL OPERATION
Basic
Operation:
Manual work
LED Indicator light on.
※When
Check:
Dust bin is full.
Intake Valve is stuck with dirt.
Wipe out the inner and outside of Intake Valve area.
1. Press the "Working time selection buttom" on the control panel to select the
work time:
begins cleaning automatically.
2. After the work is completed, the unit will emit a buzz of warning and stop. If the
power indication lamp turns to Red (battery low) at the same time, the unit will emit
a buzz as well.
Stop operation
1. To stop the operation of the unit immediately, you can turn off the power switch
on the right of the unit, or lift the unit off the floor, the unit will stop after 6~8
seconds.
2. If you want the unit to continue working, place the unit on the floor and reset the
switch of the cleaner.
Safety Devices
1. The unit will stop after 6~8 seconds lifted up from the floor.
2. The unit will STOP when wheel jammed for more than 6~8 seconds.
, about 30 minutes,
, until battery low. After 2 seconds, the unit

Publicité

Table des Matières
loading

Produits Connexes pour weasy TRC50

Table des Matières