Horizon Fitness CE8.8 Manuel Du Propriétaire page 10

ASSEMBLY STEP 9
19
18
5
6
12
18
HZ14_OM_NA_CE8.8_Rev1_2.indd 18-19
NOTE: All hardware for this step is pre-installed.
A Remove 4 PRE-INSTALLED BOLTS (18) from the
CONSOLE (19).
B Attach the CONSOLE CABLES (5) to the
CONSOLE (19).
21
C Carefully tuck the CONSOLE CABLES (5) into the
22
CONSOLE MAST (6) before attaching the CONSOLE.
Attach CONSOLE (19) to CONSOLE MAST (6) using
4 PRE-INSTALLED BOLTS (18).
NOTE: Do not to pinch any wires while attaching the console.
D Slide the UPPER HANDLEBAR (21) onto the LOWER
HANDLEBAR (12) making sure handlebars are joined
together completely. Secure the UPPER HANDLEBAR
(21) to the LOWER HANDLEBAR (12) using PRE-
ATTACHED SET SCREWS (22).
NOTE: Make sure upper handlebars are as far down as
possible. Handlebars can be damaged If not secured correctly.
E Repeat STEP D on other side.
ASSEMBLY COMPLETE!
ELLIPTICAL OPERATION
This section explains how to use your elliptical's console and programming.
The BASIC OPERATION section in the ELLIPTICAL GUIDE has instructions for the following:
• LOCATION OF THE ELLIPTICAL
• POWER/GROUNDING INSTRUCTIONS
• FOOT POSITIONING
• MOVING THE ELLIPTICAL
• LEVELING THE ELLIPTICAL
• POWER/MANUAL INCLINE OPERATION
• USING THE HEART RATE FUNCTION
19
6/4/14 8:59 AM