Enjoying Multi-Channel Surround Sound; Step 2 The Remote Control; Step 3 Quick Setup - Panasonic DVD-S49 Manuel D'utilisation

RQT8112‑En.fm Page 7 Tuesday, July 19, 2005 10:53 AM

Enjoying multi-channel surround sound

∫ WITH COAXIAL IN or OPTICAL IN
COAXIAL IN
Coaxial cable
Amplifier with a built-in
decoder or a decoder-
amplifier combination
OPTICAL IN
Optical digital audio cable
Do not bend sharply when
connecting.
≥You cannot use DTS Digital Surround decoders not suited to DVD.
≥Even if using this connection, output will be only 2 channels when playing DVD-Audio.
To enjoy multi-channel surround sound, connect with 5.1 ch AUDIO OUT terminals (
Change "PCM Digital Output", "Dolby Digital" and "DTS Digital Surround"
( page 19, "Audio" tab).
STEP 2
The remote control
∫ Batteries
≥ Insert so the poles (i and j) match those in the remote control.
≥ Do not use rechargeable type batteries.
R6/LR6, AA
Do not:
≥ mix old and new batteries.
≥ use different types at the same time.
≥ heat or expose to flame.
≥ take apart or short circuit.
≥ attempt to recharge alkaline or manganese batteries.
≥ use batteries if the covering has been peeled off.
STEP 3
QUICK SETUP
Turn on the television and select the appropriate video input on the television.
1
QUICK OSD FL SELECT OPEN/CLOSE
ADVANCED AV
DISC REVIEW ENHANCER REPEAT
MULTI
RE-MASTER
DIRECT NAVIGATOR PLAY LIST
TOP MENU MENU
Power ON.
ENTER
FUNCTIONS RETURN
To change these settings later
SUBTITLE AUDIO ANGLE/PAGE SETUP
Select "QUICK SETUP" (
PLAY MODE PLAY SPEED ZOOM GROUP
All manuals and user guides at all-guides.com
∫ WITH AUDIO IN 5.1ch
To obtain maximum performance of DVD-Audio multi-channel PCM sound, this
connection is recommended.
Y P
L
B
Amplifier
P
R (L)
SURROUND
R
OPTICAL
Please connect directly to TV. y
(R)
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
Back of the unit
right).
(L)
(R)
2 3
SETUP
Shows QUICK SETUP Follow the message
screen. and make the settings.
page 19, "Others" tab).
Audio cable Connect cables to terminals
CENTER
L
CENTER SURROUND FRONT L/L
SUBWOOFER
SUBWOOFER
FRONT
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long period
of time. Store in a cool, dark place.
∫ Use
Aim at the remote control sensor (
maximum range of 7 m (23 feet) directly in front of the unit.
4
RETURN
ENTER
Press to finish
QUICK SETUP.
corresponding to the speakers you
have connected.
Back of the unit
FRONT R/R
≥Change "Speaker Settings"
( page 19, "Audio" tab).
page 8), avoiding obstacles, at a
5
SETUP
ENTER
Press to exit.
7
7