Table des Matières
Publicité
Installation
Important
In order to reserve the required space around
the appliance for ventilation,please keep 100mm
distance between 2 sides and top of the freezer
appliance and the wall and 50 mm distance
between rear of appliance and the wall.
www.zanussi.com
ZFP18400WA_2015.indb 69
Levelling
The appliance should be level in order to
eliminate vibration. To make the appliance level,
it should be upright and both adjusters should
be firmly in contact with the floor. You can also
adjust the level by screwing out the appropriate
level adjuster at the front (use your fingers or a
suitable spanner).
69
EN
2016-01-04 16:18:45
Publicité
Table des Matières
