Faber INCA HC Instructions D'installation page 15

All manuals and user guides at all-guides.com
lution or washed in the dishwasher. They should be cleaned
• Remove grease filters.
every 2 months, or more frequently if use is particularly heavy.
•
the unit and at the same time pulling downward.
•
color over time, this will have absolutely no effect on its
• Replace, taking care to ensure that the handle
• Screw the Frame into place
faces forward.
•
Replacing Activated Charcoal Filter
The Activated Charcoal Filters are not washable
and cannot be regenerated, and should be replaced
approximately every 4 months of operation, or more
frequently with heavy usage.
•
until it unlocks from the motor housing and pull off sideways.
•
of the blower and push it inward. Then turn the charcoal
Replacing the two 35W Halogen GU10 bulbs
• Turn off electrical supply before replacing bulbs, and make
sure bulbs are cool to touch before proceeding.
head screwdriver by levering it down from under the
metal ring.
• After the snap-on lamp cover is down remove the halogen
lamp at the base and turn slightly to the left and the pull
out from the connector and turn slightly to the left.
• Replace the lamp with a new one of the same type,
making sure that you insert the two pins properly into the
housings on the lamp holder.
• Replace the snap-on lamp cover.
• Once the bulb pins are in place turn slightly to the right
to secure.
-
-
12f, re-
A
B
15