Table Des Matières; General Safety Rules; General Safety Instructions - Festool RTS 400 EQ Guide D'utilisation

Contents
General safety rules ....................................... 3
General safety instructions ............................ 3
Machine-related safety instructions .............. 4
Technical data ................................................ 5
Symbols .......................................................... 5
Intended use ................................................... 5
Electrical connection and operation ............... 5
Electronic control .......................................... 6
Dust extraction .............................................. 6
Inboard extraction .......................................... 6
External extraction by an extraction unit ...... 6
Attaching sanding material ............................ 7
Working with the tool ..................................... 7
Maintenance and care .................................... 8
Accessories, tools .......................................... 8
Systainer ......................................................... 8
Warranty ........................................................ 9
Conditions of 1+2 Warranty ............................ 9

General safety rules

General safety instructions

WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fi re and/
or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
b) Do not operate power tools in explosive atmo-
spheres, such as in the presence of fl ammable liq-
uids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
All manuals and user guides at all-guides.com
c) Keep children and bystanders away while op-
erating a power tool. Distractions can cause you to
lose control.
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Un-
modifi ed plugs and matching outlets will reduce risk
of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and re-
frigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or mov-
ing parts. Damaged or entangled cords increase the
risk of electric shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
f)
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
a) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do not
use a power tool while you are tired or under the in-
fl uence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result
in serious personal injury.
b) Use personal protective equipment. Always
wear eye protection. Protective equipment such as
dust mask, non skid safety shoes, hard hat, or hear-
ing protection used for appropriate conditions will
reduce personal injuries.
c) Prevent unintentional starting. Ensure the
switch is in the off-position before connecting to
power source and/or battery pack, picking up or
carrying the tool. Carrying power tools with your
fi nger on the switch or energising power tools that
have the switch on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left at-
tached to a rotating part of the power tool may result
in personal injury.
3
2 ) ELECTRICAL SAFETY
If operating a power tool in a damp location is
3 ) PERSONAL SAFETY